新闻资讯 NEWS

行业新闻

当前位置: 网站首页 > 新闻资讯 > 行业新闻
  • 自动门故障的排除
  • 本站编辑:杭州国保科技有限公司发布日期:2020-09-01 11:01 浏览次数:

根据使用需要,确定自动门的各项功能配置及自动门维修:

自动门工程的验收

1、自动门工程构件连接必须牢固,结构具有足够的强度和刚度,以保证活动门扇的开闭灵敏。

2、自动门铝合金导轨安装位置必须正确、牢固可靠,感应器的安装位置、连接方法、探测范围须符合要求。

3、门立柱及横梁材料,除不锈钢、耐腐蚀材料外,其余须进行防锈处理。由于自动门安装具有“易学难精”的特点,没有丰富的安装经验,自动门运行时经常会发生伪故障,而且通常较难以处理,同时也难以保证日后的售后服务。

根据门面的尺寸,选择合适的横梁、门扇的装饰类型

1、从配合自动门的形象及方便自动门以后的保养维修的角度考虑,最好采用不锈钢、铝型材或铝塑板等材料作为横梁、门立柱的外包材料;如采用大理石作为外饰面,自动门工程与大理石工程之间必须事先确定相互配合的施工方案,否则会造成严重的后果。

2、门扇的材料一般采用玻璃为主(除医院、工厂等特殊要求外),目前常见的有全玻璃感应门、上、下门夹式玻璃感应门及有框玻璃感应门。全玻璃门的制作成本较低,通透性较好;上、下门夹式玻璃门属于老式门体类型,现采用较少;有框玻璃门的制作成本较高,但显得稳重、大气,密封性较好;但不适合门洞较小时使用,所以当门洞面积较大时,通常使用有框玻璃感应门方式。

不同的品牌的自动门,其标准配置也不同,在选定了自动门品牌及确定其基本配置后,再根据自已的使用要求,确定需要增加的附加功能:

1、是否需要配置安全光线(安全辅助传感器),以确保在任何情况下均不会发生自动门机夹人事件(特别是医院等);

2、是否需要安装电子锁;或使用其它的特别开门方式(如:刷卡门禁、密码门禁、考勤门禁、遥控器等);

3、是否需要配置后备电源,以保证消防系统检测的通过。

According to the use needs, determine the automatic door function configuration and automatic door maintenance

Acceptance of automatic door Engineering

1. The automatic door engineering components must be firmly connected, and the structure should have enough strength and stiffness to ensure the opening and closing sensitivity of the movable door leaf.

2. The installation position of aluminum alloy guide rail of automatic door must be correct, firm and reliable, and the installation position, connection method and detection range of inductor must meet the requirements.

3. In addition to stainless steel and corrosion-resistant materials, the rest of the door column and beam materials shall be treated with rust prevention. Due to the characteristics of "easy to learn but difficult to master" in the installation of automatic doors, there are often false faults in the operation of automatic doors without rich installation experience, which are often difficult to deal with, and it is difficult to guarantee the after-sales service in the future.

According to the size of the door, choose the appropriate type of beam and door leaf decoration

1. From the perspective of matching the image of the automatic door and facilitating the maintenance and repair of the automatic door in the future, it is better to use stainless steel, aluminum profile or aluminum plastic plate as the outsourcing material of the beam and door column; if marble is used as the external facing, the construction scheme of mutual cooperation between the automatic door project and the marble project must be determined in advance, otherwise serious consequences will be caused.

2. The material of door leaf is generally made of glass (in addition to the special requirements of hospitals and factories). At present, there are all glass sensing doors, upper and lower door clip type glass sensing doors and framed glass sensing doors. The production cost of all glass doors is low, and the permeability is good; the upper and lower door clip glass doors belong to the old door body type, which are less used now; the production cost of framed glass doors is higher, but it is stable, atmospheric and has good sealing performance; but it is not suitable for the use of small door openings, so when the door opening area is large, the framed glass sensing door mode is usually used.

Different brands of automatic doors have different standard configurations. After selecting the automatic door brand and determining its basic configuration, the additional functions to be added are determined according to the user's own requirements

1. Whether it is necessary to configure safety light (safety auxiliary sensor) to ensure that the automatic door machine will not be jammed under any circumstances (especially the hospital, etc.);

2. Whether it is necessary to install electronic lock; or use other special door opening methods (such as: card access control, password access control, attendance control, remote control, etc.);

3. Whether it is necessary to configure backup power supply to ensure the passing of fire protection system detection.